ICP Trigger Capping Head – Australian-Made Trigger and Pump Cap Tightener
The ICP trigger head is our Australian-made capping head for trigger sprays, pump tops, dispenser pumps and other closures that a standard chuck can’t grip. It fits in place of the standard motor on the ICP-C1 bench top capper and the ICP-AC1 and ICP-AC1-PLC automatic cappers, and it also fits Asset C1 and AC1 cappers. Designed and built in Sydney.
Want to try it on your closures first? The ICP trigger head is also available to hire. See ICP trigger head hire.
Built to last, backed for longer
12-month warranty on every new ICP trigger head
Plus free lifetime support from the Australian team who designed and build it. T&Cs apply.
Australian Made and Owned
Designed and built in Sydney by ICP Packaging Machines Australia.

How it works
Standard overhead chucks grip a cap from the top, which doesn’t work for trigger sprays, pumps and other shaped closures. The trigger head grips the closure from the sides with four polyurethane wheels and spins it on. It is driven by a German-made Deprag air motor that stalls at the torque you set, so every closure gets the same tightness. Swapping between the trigger head and the standard capping motor takes two screws.


Why choose the ICP trigger head
- Tightens what a chuck can’t: triggers, pumps, dispensers, flip tops and cone tops.
- Consistent torque on every closure, from the Deprag air motor’s stall point.
- One head, bench or line: fits the ICP-C1 bench top capper and the ICP-AC1 and ICP-AC1-PLC automatic cappers.
- Fits Asset cappers too, with parts interchangeable with the Asset Pumptite.
- Quick swap: two screws to change between the trigger head and the standard capping motor.
- Australian made with local spare parts and support.
Based on the Asset Pumptite, with interchangeable parts
The ICP trigger head is based on the Asset Packaging Pumptite head used on Asset cappers, and the parts are interchangeable. If you run an Asset C1 or AC1 capper, the ICP trigger head fits it, and the same capping wheels and spares suit both the ICP trigger head and the Asset Pumptite.
Specifications
| Type | Trigger and pump cap tightening head (capper attachment) |
|---|---|
| Closures | Trigger sprays, pump tops, cream and lotion dispenser pumps, flip tops, cone-shaped tops and standard screw caps from about 10 mm to 45 mm |
| Grip | Four polyurethane wheels (95 duro): fine, coarse, smooth or stepped |
| Drive | German-made Deprag air motor, stalls at the set torque |
| Torque | Infinitely adjustable |
| Fits | ICP-C1, ICP-AC1 and ICP-AC1-PLC cappers, plus Asset C1 and AC1 cappers |
| Fitting | Replaces the standard capping motor, held by two screws |
| Air supply | 600 kPa (87 psi) |
| Size (W x D x H) | 200 x 250 x 400 mm, including motor |
| Weight | About 8.3 kg |
| Made in | Sydney, Australia |
| Warranty | 12 months (T&Cs apply) |
Capping wheels and spare parts
The head grips the cap with polyurethane wheels (95 duro). Choose the wheel to suit your closure, and keep a spare set on the shelf:
- Fine tooth wheels (set of 4) for most trigger and pump caps
- Coarse tooth wheels (set of 4) for extra grip
- Smooth wheels (set of 2), used together with 2 fine tooth wheels
- Stepped wheels (set of 4) for shaped and stepped closures

Cappers it fits
Semi-automatic bench top capper for screw caps, bottles and jars.
Automatic pneumatic capper that sits on your conveyor.
Automatic capper with PLC touchscreen control and saved settings.
Call the people who designed and build it on 02 9987 1871.
Frequently Asked Questions
Common questions about the ICP trigger capping head.
What is a trigger capping head?
A capper attachment that tightens trigger sprays, pumps and other shaped closures that a standard overhead chuck cannot grip. It grips the closure from the sides with four wheels and spins it to a set torque.
What closures can it tighten?
Trigger sprays, pump tops, cream and lotion dispenser pumps, flip tops, cone-shaped tops and standard screw caps from about 10 mm to 45 mm.
Which cappers does it fit?
ICP-C1 bench top capper, ICP-AC1 and ICP-AC1-PLC automatic cappers, and Asset C1 and AC1 cappers. Ask us about other capper brands.
Does it fit my Asset capper?
Yes. The ICP trigger head is based on the Asset Pumptite head and fits Asset C1 and AC1 cappers. Parts are interchangeable with the Pumptite, including the capping wheels.
How is the torque set?
The Deprag air motor stalls at the torque you set, so it stops turning once the closure is tight. Every closure gets the same tightness, without over- or under-tightening.
How fast is it?
Speed depends on your closures, containers, product and line, so we don’t quote a number. The capper is rarely the limit. The best way to know is to hire one and try it with your own closures.
Which capping wheels do I need?
Fine tooth wheels suit most trigger and pump caps. Coarse tooth wheels give extra grip, smooth wheels are used with two fine tooth wheels, and stepped wheels suit shaped closures. If you’re unsure, call us and we’ll help you choose.
Can I hire one before I buy?
Yes. The ICP trigger head is available to hire, so you can try it on your own closures first.



