Hire an Automatic Capping Machine – ICP-AC1 Auto Capper
Hire the Australian-made ICP-AC1, an automatic capping machine that mounts onto your conveyor and tightens each screw cap to a set torque. It suits short-term contracts, busy seasons, trials of a new cap, backup while another machine is serviced, or testing before you buy.
Australian Made and Owned
Designed and built in Sydney by ICP Packaging Machines Australia.
Want to own one? The ICP-AC1 is also for sale. See the full ICP-AC1 details.
How hiring works
- Set up for your caps: send us your containers and caps, and we fit the right chuck and set the torque before it leaves us, free of charge within reason.
- Free phone and video support for the whole hire, from the people who designed and build it.
- Delivered Australia-wide.

How it works on your line
The ICP-AC1 mounts onto a running conveyor. When a container arrives, the gates stop it and the clamping jaws hold it steady. The tightening head lowers onto the cap and the air motor tightens it to the set torque, then the jaws release and the container moves on. Independent timers control the delay and dwell of both the chuck and the jaws, so you can fine-tune each step. No operator is needed.
Why hire the ICP-AC1
- Consistent torque on every cap, set by the air motor’s stall point.
- Fully pneumatic with no electrics, so it suits flammable products.
- New 2026 floating motor design for consistent, repeatable torque.
- Quick changeover between container and cap sizes.


Key specifications
| Type | Automatic inline screw capper, mounts on a running conveyor |
|---|---|
| Torque | Air motor stalls at the set torque, infinitely adjustable |
| Air motor | German-made Deprag air torque motor, with inline oiler for long motor life |
| Motor design | 2026 floating motor design: chuck shaft supported in its own precision bearings |
| Operation | Fully pneumatic, with independent pneumatic timers for the chuck and the clamping jaws. No electrics. |
| Container handling | Container gates, air whisker switch, and clamping jaws with interchangeable pads |
| Chucks | 35 mm to 125 mm, plus custom chucks |
| Container height | 0 to 450 mm, set with a handwheel and locking ring |
| Adjustments | Descending pressure, motor torque and stall timing |
| Guides | Low-maintenance linear bushings and shafts |
| Air supply | 600 kPa (87 psi) |
| Dimensions (w x d x h) | 500 x 650 x 870 mm |
| Weight | About 33 kg |
| Conveyor | Not included, available separately |
Other cappers for hire
Automatic capper with PLC touchscreen control.
Bench top capper for smaller runs.
Run it as a complete line. The ICP-AC1 is part of our single head 1 litre filling line, single head 5 litre filling line and 2 head filling and capping line, with conveyor, sorting table and accumulation table, set up and ready to run. Hire or buy the full line. See all full production lines.
Frequently Asked Questions
Common questions about hiring an automatic capping machine.
Can I hire an automatic capping machine?
Yes. RENTAFILL hires the ICP-AC1 auto capper Australia-wide.
Do I need a conveyor?
Yes. The ICP-AC1 mounts onto a running conveyor. If you don’t have one, we also hire conveyors.
Will the capper be set up for my caps?
Yes. Send us your containers and caps. We fit the right chuck and jaws and set the torque before it leaves us, free of charge within reason.
Do I need an air compressor?
Yes. The ICP-AC1 is fully pneumatic and needs 600 kPa (87 psi). In the Sydney area, we can also hire you a compressor with the capper.
How long can I hire it for?
Tell us your dates and production run, and we’ll quote for your hire period.
What support do I get during the hire?
Free phone and video support for the whole hire, from the people who designed and build the machine.
Can I buy an ICP-AC1 instead?
Yes. The ICP-AC1 is also for sale, with a 12-month warranty (T&Cs apply) and free lifetime support.




