Available for hire

Filling Machine Nozzles

Every type of ICP filling machine nozzle explained: inward and outward opening PSO, compact PSO, pinch valve, suck-back, plug and standard nozzles, and which products each one suits.

Hire rates on application

Tell us a little about your project and how long you'll need the equipment. We'll get back to you with availability and hire rates.

Prefer to talk? Call us on 02 9987 1871

SKU: HIRE-NOZZLES Category:

Filling Machine Nozzles – Choosing the Right Nozzle for Your Product

The right filling machine nozzle makes the difference between a clean, accurate fill and drips, foam or strings on every container. ICP Packaging Machines Australia makes a full range of nozzles in 316 stainless steel to suit our fillers, from simple open nozzles to positive shut-off (PSO), suck-back, plug and pinch valve nozzles. Here’s what each one does and which products it suits.

ICP 316 stainless filling machine nozzles

Quick guide: which nozzle do I need?

Your product Nozzle
Thin liquids that drip between fills Inward opening PSO nozzle
Thin liquids that foam Outward opening PSO nozzle
Small, accurate fills on the ICP-1 Compact PSO nozzle
Small fills of oils, fragrances and concentrates 6 mm pinch valve nozzle
Creams and stringy products Suck-back nozzle
Jams, butters, thick creams and soups Plug nozzle
Free-flowing products, simple set-ups Standard nozzles
Inward opening PSO nozzles on an automatic filling machine

Inward opening PSO nozzles

For thin, low-viscosity products that drip between fills. A 316 stainless plunger inside the nozzle seals against the inside flange at the end of every fill, giving a clean cut-off.

  • Sizes: 12, 16 (short), 19 and 25 mm outside diameter
  • 180 to 280 mm long
  • Festo or SMC pneumatics with flow controls on the up and down action
  • 1.5 inch (50.5 mm) tri-clamp fitting
  • Suits benchtop and automatic inline fillers
Outward opening PSO nozzle

Outward opening PSO nozzles

For products that foam while filling, and thin products that drip. The plunger closes against the outside tip with a Viton seal, and the product flows around it down the container wall, which reduces foaming.

  • Sizes: 16, 19 and 25 mm outside diameter, 12 mm on request
  • Viton seal on the sealing plunger
  • Festo, Metal Work or SMC pneumatics with flow controls
  • Suits benchtop and automatic inline fillers
ICP compact PSO nozzle

Compact PSO nozzle

A compact positive shut-off nozzle built for the ICP-1 benchtop filler, for small, accurate, drip-free fills. The plug seals inside the nozzle body above the tip, like a thumb over the top of a straw, holding the product in the nozzle between fills.

  • Built for the ICP-1 benchtop filler
  • Mounts directly to the valve body or on a gooseneck for height adjustment
  • Nozzle tips from 4 to 20 mm inside diameter (5.5 to 22.4 mm outside)
  • 316 stainless steel
ICP 6 mm pinch valve nozzle

6 mm pinch valve nozzle

For small-volume fills where accuracy and a clean shut-off matter, such as essential oils, fragrances, cosmetics, concentrates and juices. Air pressure squeezes a flexible seal closed at the end of each fill, so nothing drips.

  • 6 mm nozzle in 316 stainless steel
  • Food-grade EPDM seal as standard, silicone available
  • Half inch tri-clover clamps for quick removal and cleaning
  • Suits ICP benchtop fillers and the 2 and 4 head automatic fillers
Suck-back nozzle on an ICP liquid filling machine

Suck-back nozzles

The go-to nozzle for products that string between fills or are thick, such as cosmetic creams, lotions and gels. After each fill, a flat plunger retracts slowly while the filler recharges and draws the product back into the nozzle head, so no string or tail is left on the container.

  • Sizes: 8, 10, 12, 16, 19 or 25 mm diameter, up to 150 mm long
  • Viton seal on a 316 stainless plunger
  • Festo or SMC pneumatics with flow controls
  • 1.5 inch tri-clamp fitting
ICP plug nozzle for thick products

Plug nozzles

For thick products that need a large, free flow, such as jams, butters, thick creams and soups. A large plunger lifts clear to let the product through, then plugs the outlet at the end of the fill.

  • Plug in PET-P food-grade plastic, PEEK or 316 stainless steel
  • Festo or SMC pneumatics with flow controls
  • 1.5 inch (50.5 mm) tri-clamp fitting
  • Suits automatic and semi-automatic fillers
Standard nozzles for a volumetric filling machine

Standard nozzles

Simple, open stainless nozzles for free-flowing products where drips between fills aren’t a problem, and for matching the nozzle size to a narrow or wide container neck.

  • Sizes: 6, 8, 9.5, 12.8, 15.8, 19.5 and 22 mm
  • 316 stainless steel, with Viton seals on some nozzles
  • 6 to 12.8 mm nozzles have flanged ends
  • Suit the ICP-1 and ICP-M2RV range of fillers

See also filling machine hoppers and conveyor gates and sensors.

Call our Sydney team on 02 9987 1871.

Frequently Asked Questions

Common questions about filling machine nozzles.

What is a PSO nozzle?

PSO stands for positive shut-off. A plunger in the nozzle seals at the end of each fill, so the product can’t drip between fills.

What is the difference between inward and outward opening PSO nozzles?

An inward opening nozzle seals against the inside flange and suits thin products that drip. An outward opening nozzle seals against the outside tip and suits products that foam.

Which nozzle is best for creams?

A suck-back nozzle, which draws the product back into the nozzle after each fill so no string is left on the container. For very thick products with pieces, use a plug nozzle.

What are the nozzles made from?

316 stainless steel and food-grade materials, with Viton, EPDM or silicone seals depending on the nozzle.

Will they fit my filler?

Our nozzles suit ICP fillers, and most also fit Asset Packaging fillers. Tell us your machine model and we’ll confirm the fit.