Compact-A-Wrap Semi-Automatic Wrap-Around Labeller Hire
The Compact-A-Wrap is a premium semi-automatic labeller for round bottles, jars and containers. It applies one or two labels, as a wrap-around label or front and back labels, to containers from 25 to 150 mm in diameter. A fibre optic sensor detects the container on the rollers and the PLC runs the cycle, while a pneumatic pressure roller applies each label smooth and straight. Delivered Australia-wide.
Australian-founded, built to last
Compact Labelling was founded in Sydney, where its labellers were designed and built. Production later moved to Thailand, and the company is still run by its original Australian founder, so the same design and build quality carry on today.
Prefer to buy? See the Compact A-Wrap for sale.

How it works
Place a round container on the rollers. The fibre optic sensor detects it and the PLC starts the cycle: the container is rotated, the label is fed onto it and the pneumatic pressure roller presses it on. The label gap sensor stops each label in the right place, and a selector switch sets single labels or alternating front and back labels. The waste backing paper winds onto a spool.


Why hire the Compact A-Wrap
- Try it on your own containers and labels before you buy.
- Cover a product launch, peak season or a short run without a large spend.
- Free phone and video support for the life of the hire.
- Delivered Australia-wide.
What makes Compact different
Most semi-automatic labellers rely on a simple mechanical sensor and a foot switch. Compact’s A-Wrap, A-Pad and A-Tube are built more like industrial machines, with a programmed PLC running the whole labelling cycle for consistent, repeatable results, and stainless steel and aluminium construction with quality components from leading suppliers.

High-quality label gap sensor
An electronic label gap sensor (LionEye2 on current models) reads the gap between labels on the roll and stops each label in exactly the right place, for reliable label stop and accurate placement on every container.

Fibre optic product sensor
A fibre optic sensor detects the container in position and starts the labelling cycle automatically, so there’s no foot switch to press. The operator simply loads and unloads, for faster, more consistent labelling.

Adjustable pneumatic pressure roller
A pneumatic actuator controls the top roller pressure, which you can adjust precisely to suit your container and label, so every label goes on smooth, tight and bubble-free.
That combination puts them in a class of their own among benchtop labellers, and is why we rate them the best in quality and design.
Specifications
| Type | Semi-automatic wrap-around labeller for round containers |
|---|---|
| Containers | Round, 25 to 150 mm diameter (from 8 mm with the small bottle adaptor; up to 250 mm with a pressure roller modification) |
| Label types | Single, front and back, or wrap-around |
| Label size | Height up to 180 mm; length 15 to 220 mm (up to 500 mm with long label delay) |
| Label roll | Up to 300 mm diameter, 38 or 76 mm core |
| Labels | Self-adhesive, die-cut; opaque, clear or translucent (clear labels need the optional clear label sensor) |
| Label direction | Left or right edge leading |
| Control | Programmed PLC |
| Sensors | Electronic label gap sensor and fibre optic product sensor |
| Construction | Stainless steel and aluminium |
| Size (W x D x H) | 360 x 720 x 500 mm |
| Weight | 35 kg |
| Power | 240 V, 10 A |
| Air | Compressed air required |
Label roll direction
Labels can be wound with the right or left edge leading. Check your label printer’s unwind direction against these diagrams when ordering labels.


Options
- Orientation device, for over-labelling or registration labelling
- Printer attachment for a Meenjet MXPlus 3.0 printer, to print date and batch codes onto each label
- Printer output for print-and-apply labelling
- Small bottle adaptor for containers under 25 mm
- Long label delay for labels up to 500 mm long
- Clear label sensor
- Foot switch
Print date and batch codes as you label

The optional printer attachment mounts a Meenjet MXPlus 3.0 thermal inkjet printer over the label path, so the A-Wrap prints date codes, batch numbers and best-before dates onto each label just before it’s applied. You label and code in one step, without a second pass or pre-printed labels.
The MXPlus 3.0 runs unlocked Meenjet ink, so you’re never tied to one supplier for cartridges. It’s available to buy or to hire.
See it in action
The Compact range
| Compact A-Wrap (this machine) | Round bottles and jars: wrap-around, or front and back labels. |
|---|---|
| Compact A-Pad | Flat and oval containers, jar lids and bases. |
| Compact A-Tube | Plastic and metal tubes, on expanding mandrels. |
| Compact CSL | Tamper-evident seals over carton corners. |
| Compact C150 | Electric label dispenser for faster hand labelling. |
Also for hire
Australian-made automatic inline wrap-around labeller.
Batch and date code printer.
Call our Sydney team on 02 9987 1871.
Frequently Asked Questions
Common questions about the Compact A-Wrap.
What containers can the A-Wrap label?
Round bottles, jars and containers from 25 to 150 mm in diameter. A small bottle adaptor takes containers down to 8 mm, and a pressure roller modification takes containers up to 250 mm.
Can it apply front and back labels?
Yes. A selector switch sets single labels or alternating front and back labels.
Can it apply clear labels?
Yes, with the optional clear label sensor.
Can I print labels or codes as I go?
Yes. The optional printer attachment mounts a Meenjet MXPlus 3.0 to print date and batch codes onto each label before it’s applied, and the printer output lets you connect a label printer for print-and-apply labelling. The MXPlus is available to buy or hire.
How fast is it?
Speed depends on your containers, labels, product and operator, so we don’t quote a number. The best way to know is to hire one and try it with your own containers and labels.
What is the minimum hire?
The minimum hire is 7 days.
Can I buy one?
Yes. The Compact A-Wrap is available new.





